📄️ Device Connectivity Overview
Device Connectivity Goals
📄️ MQTT Direct Onboarding
Onboarding Steps
📄️ MQTT Gateway
1. Access Steps
📄️ Non-Standard MQTT Protocol
Problems
📄️ Modbus TCP Direct
1. Functional Overview
📄️ Modbus RTU
Prerequisites
🗃️ Third-Party Services
4 items
📄️ TCP
There are two ways for TCP device connectivity:
📄️ Serial Port
Via Device Connectivity Service
📄️ CoAP
CoAP can be accessed in the following ways:
📄️ HTTP
HTTP Protocol Access allows devices that do not natively support MQTT to exchange data with ThingsPanel through standard HTTP requests. Devices report telemetry to the HTTP adapter; ThingsPanel sends commands or control messages through MQTT; the adapter supports both direct HTTP downlink and device long polling.
📄️ RTMP Camera
RTMP (Real-Time Messaging Protocol) cameras are camera devices that use the RTMP protocol for video transmission. RTMP is a real-time streaming media transmission protocol originally developed by Adobe for audio and video transmission and playback on the Internet.
📄️ UDP
Via Rule Engine
📄️ OPC-UA
What is OPC UA
📄️ RTSP Camera
RTSP (Real Time Streaming Protocol) is a protocol used for real-time audio and video transmission, typically used in surveillance devices, video conferencing, and other scenarios.
📄️ GB28181 Security Camera
* Use ThingsPanel GB28181 Device Connectivity Service to directly access national standard cameras.
📄️ EZVIZ Cloud Video Integration
ThingsPanel integrates EZVIZ Cloud cameras through the EZVIZ Player in ThingsVis.
📄️ Gateway Device MQTT Interaction Spec
Overview
📄️ Direct Device MQTT Interaction Spec
Overview
📄️ Custom Topic & Message
I. Overview
📄️ One Type One Secret
Core Principle
📄️ Zigbee2MQTT
The Zigbee2MQTT connector brings Zigbee devices managed by Zigbee2MQTT (Z2M) into ThingsPanel. After reading this guide you can install the connector, discover the devices Z2M has paired, bind them in bulk, watch their telemetry and send commands such as on/off and brightness.
📄️ Matter
The Matter connector lets ThingsPanel discover, bind, monitor and control Matter lights (On/Off and dimmable) that are on your local IP network. It is a Third-party Access connector: you install it once, create an access point, and import the devices you want.